Sena PS410 Specifiche

RV-SMB UHF/VHF Rack Mountable Network Attached Radio Modem Technical Manual Version A1 November 2012 Raveon Technologies Corporation 2461 Im

/serial/*1/parameter/Baudrate = 38400 /serial/*2/parameter/Baudrate = 38400 /serial/*1/parameter/Inter_character_timeout = 20 /serial/*2/parameter/Int

6. Operation Once the RV-SMB is turned on, the terminal server will start. Radio A is always powered, and Radio B is only powered when there is an

7. Troubleshooting Symptom: Cannot enter Command Mode on radio module Solution #1. Verify the serial port baud rate on the modem and terminal serv

Limited One Year Warranty If within one year from date of purchase, this product fails due to a defect in material or workmanship, Raveon Technologie

Table of Contents 1. General Information about the RV-SMB ... 3 1.1 Congratulations!

1. General Information about the RV-SMB 1.1 Congratulations! Congratulations on your purchase of a RV-SMB Network Attached Radio Modem device. P

2. Overview The RV-SMB is a 1U rack-mountable (19”) high-speed UHF/VHF network attached radio modem chassis, with options for redundant radio modem

3. Specifications 3.1 General Size ... 482.6mm X 45.0mm

4. Electrical Inputs and Outputs The front of the <bs_pn> has these features: 1. Radio A Power and Status Indicators 2. Radio B Power and St

4.4 GPS TNC Connector The I/O connector for GPS is a 50-ohm TNC jack, and is intended for use with a 50-ohm GPS antenna. 4.5 RF N-Type Connector

5. Configuring the RV-SMB 5.1 Overview The RV-SMB’s SENA PS410 terminal server can be configured via the network interface, or via the front pan

5.4 Terminal Server Configuration Via Serial Console To configure the terminal server via the serial console port, open a terminal emulator, set th